25mm 1 inch dia RGBW 316 SUS 12V Thru Hull Transom LED underwater boat lights
Description:
This underwater Light outperforms any other LED light in the same category in terms of price and light output. One C REE high-power LEDs provide the highest lumen-per-watt underwater light ever made.
The marine grade 316 stainless steel body makes it extremely corrosion resistant.
Specifications:
| Product Name | Stainless Thru-Hull Underwater LED Lights |
| Voltage | 12V / 24V |
| Dimension | Diameter: 25mm (0.98'' ) Height: 40mm (1.6'' ) |
| Net Weight | 0.06kg |
Dimension:
Dimension of Thru-Hull Underwater led lights
Diameter: 25mm (0.98'')
Height: 40mm (1.57'' )
40mm (~1.57”) Short and 25mm (~0.98”) diameter small footprint.
Mechanical Connection: One 20mm (~0.8") dia. hole.
Maximum Hull Thickness: < 25mm (~0.98”).
Installation Guide:
Step 1. Carefully measure and mark the light's center position on the outside of the boat with a pencil.
Step 2. After double checking your measurements, chuck a 0.8-inch drill bit into an electric drill and drill through the hull on the marks you made in the previous step.
Step 3. Use a hole saw of the correct diameter to cut the hole, using the smaller hole as a guide for the drill bit.
Step 4. Clean up any rough spots around the hole with sandpaper.
Step 5. Remove the light, then use a scraper to remove any antifouling inside the line back to the original gelcoat.
Step 6. Remove the light, then use a scraper to remove any antifouling inside the line back to the original gelcoat.
Step 7. On the inside of the boat, screw on the retaining nut, then route the wires and connect them to a suitable switch or breaker.
Tag: Thru Hull Transom LED underwater boat lights , 12V boat lights. underwater lights
